Do you have a Jeep wrangler in your house? If your answer is yes then I will say that you have taken a perfect decision of having the Jeep wrangler because its knowns as the best car for off-roading.

As you have taken the best off roading car then you are going to go for off road drive with it? I am right or wrong? If I am right then I think its essential for you to know few basic things about car that are how to change tire, How to change shocks on a jeep wrangler JK because if your car become punctured on the middle off the road or your shocks got damaged then you will hardly get any mechanic to repair it that’s why its better to know How to replace shocks on a Jeep wrangler JK.

In this article cartoolsguide will guide you about how to change shocks on a jeep wrangler JK in a step by step process so that you can do the task by yourself after reading it.

How to change Shocks on a Jeep Wrangler JK 2022

Now in this below few steps we are going to describe you how to change shocks on a jeep wrangler JK.

Before changing the shocks of your Jeep Wrangler JK you should park your Jeep Wrangler JK on a flat paved surface. After that, you should apply the parking brake. Next you should put a wheel chock behind one of the Jeep wrangler tire so that the tire should not move while changing its shocks.

To change the old shocks you must keep ratchet and socket to loose the nuts from left side and right side.

To complete the whole task you may need to remove the air box or other components to gain access to the upper shocks stud nut of your jeep wrangler.

You may have to hold the stud with a pair of vise-grip pliers after that you may have to loosen the nuts with an open or box-ended hand wrench. Now you should remove the nut, washer, and shock bushing from every single front upper shock stud.

Now you must lift the front axle of your jeep wrangler with the help of a floor jack . Lift one side of the axle at a time and place the jack stand below every single side of a front axle out from the way of the bottom of a shock absorber.

After that remove the bolts from upper portion and lower portion with the help of a socket and ratchet.

Next you should take the new shocks which you have brought from the market then squeeze the new shocks with your hand before installing it.

You must remember one thing that is while putting the shocks onto the upper and lower bolts put the bottom end of the shocks first after that tighten all the bolts to keep it secure.

Once again use the ratchet set to tighten the bolts. After tightening the bolts you should use a drop of liquid onto the bolt’s threads and secure the nut.

Now after replacing the old shocks you must remove the wheel chock which you have placed in front of your car wheel.

How to change Rear shocks on a jeep wrangler

Now we are going to describe how to change rear shocks on a jeep wrangler

At first park your Jeep wrangler on a flat surface. Keep one of the wheel chocks in front of one of the front tires of your car and use the hand brake.

Raise and support the rear axle on one side at a time with the help of a floor jack after that place a jack stand under every single side of the rear axle from the shock absorber.

Now you should loose the upper bolts and lower bolts nut with the help of a socket ratchet and a hand tool.

Now take the new shocks that you have brought from the market and squeeze it with your hand after that put the end of the shocks on the bolts and tighten all the bolts of your shock in a one-by-one way.

Test Drive

After replacing the old shocks you should drive your jeep wrangler to test whether everything is done perfectly or not. While having a test drive you must remember one thing that do not drive at a high speed. Drive at a slow speed and check whether you have replaced the old shocks perfectly or not. If you hear any sound from it then you must stop and check whether the nuts and bolts are tighten or not? If not then take out your socket and ratchet set and tight it and if you do not hear any sound and find everything is ok then you have successfully save $300.

How much does it cost to replace shocks on a jeep wrangler JK?

Now if you are having a Jeep wrangler then you may have a question in your mind that how much does it cost to replace the shock of a jeep wrangler JK?

My answer will be the cost of replacing Jeep Wrangler JK shocks falls on 2 different parts one is for buying the new shocks and the other one is for paying the labor charge. For buying a new shock you have to expense $150-$250 and for paying the labor charge you have to expense $300-$400. So in total, the expense of replacing shocks of your jeep wrangler JK is $500-$650.

If you know How to change shocks on a Jeep wrangler then you can at list save the price of labor charge which is almost $300-$400. You can perform the task by yourself only just you have to use your biceps while loosing and tightening the nuts of your shocks.

If you read our guides with full of attention or watch a youtube tutorial video then you can very easily learn how to change shocks on a jeep wrangler.

Read more about – How to install front shocks on a chevy truck

Conclusion

If you want to have a comfortable off road ride from your jeep wrangler then you must replace your old shocks when its needed because shocks are the important car parts. If your shocks remain damaged then you are not going to get smooth and comfortable ride from your jeep wrangler.

So if you want to replace the old shocks and install new shocks in your jeep wrangler by yourselves then read our article how to change shocks on a jeep wrangler jk as in this article we have described in a step by step process how to replace shocks on a jeep wrangler jk.